GE appliance repair in Sherman Oaks

GE washers

• Clothes wet at the end of the cycle. On GE top-loaders, worn suspension rods cause the washer to abort the final spin. See washer not spinning.
• Agitates but does not spin, or spins but does not agitate. The mode shifter under the tub.
• No codes on the display. GE top-loaders store fault codes in a service mode and show them with the cycle lights. Reading them is the first step of the diagnosis.
• GE stacked laundry centers. Common in Sherman Oaks apartments. The washer and dryer are one unit, and the usual repairs are suspension rods, the lid lock, the drain pump and the dryer belt.

GE dryers

• Squealing or scraping. The rear drum bearing and the front glides wear out. See dryer making loud noise.
• No heat. The heating element assembly or a safety thermostat on electric models, the igniter or valve coils on gas models.
• Will not start. The door switch, the belt switch or the motor. See dryer won't start.

GE refrigerators

• Temperatures drifting, fans or compressor not running, display acting up. The main control board on the back of the unit is a frequent failure on GE refrigerators.
• Refrigerator warm, frost on the freezer back wall. Defrost heater or sensor. See freezer cold, refrigerator warm.
• Ice maker in the door not working. On Profile and Café French door models: the ice maker, its fill tube or frost in the ice compartment.
• Second refrigerator in the garage struggling in summer. See garage refrigerator not cooling.

Before you call

Find the model number. On GE refrigerators it is on a tag inside the fresh food section, on the upper side wall. On washers and dryers it is under the lid or inside the door frame.